The quality control of production process using coefficient of variation.empirical analysis with data for the compressive strength of concrete.

Autorët

  • Teuta XHINDI Autor
  • Orkida ILOLLARI Autor

##doi.readerDisplayName##:

https://doi.org/10.68906/umsh.euro.15.258

Abstrakti

There are many practical situations in which we are interested to study the homogeneity of a population Ω such as textile, concrete, plastic material, wood etc. In case of concrete, as one of tenth materials with the more risk in the world, designers and builders are very concerned about the fact that his compressive resistance being within allowed(permissible)licensed limits in the entire structure. In this paper, homogeneity of a population is controlled by the control charts for coefficient of variation. The control chart is one seven instruments that Deming includes to the statistical quality control methodology. They are widely used to concrete industry to provide that the designed strength is being achieved and maintained within the limits as it is predicted in the CEN Guide (Product Standards and conformity assessment guideline, CEN / TC N6287, 2000-11-09). In this paper is presented a control chart for coefficient of variation based on the values of compressive strength of concrete, the value of coefficient of variation based on technical criteria and the p( c > )= . Selection of the concrete was due to the development of the construction industry in Albania after 90s. ACADEMIC STUDIES IN HUMAN, EDUCATION AND SOCIAL SCIENCES 174 INTRODUCTION T he production process operates over time by producing a series of products that can be considered as elements of the population Ω, all of the elements that the process can produce. If we measure the same characteristic X in each product, is observed a degree of variation in the values. Such variation may be due to environmental conditions, performance of an instrument, differences in raw materials, differences in the performance of operators ect. Shewhart, in his work, divides the production processes in two groups: the processes that display natural variation and processes that additionally display special sources of variation. Shewhart described the first processes as being in statistical control while the second processes as not being in statistical control. In the case when the production process is not in statistical control, the correction operations are needed to return the process in statistical control.

Botuar

2020-05-05

Numri

Seksioni

Articles